Out of stock
-26€
Overview
Specs
In the box
Accessories
- Broadcast sound quality
- Low noise circuitry
- Internal rechargeable lithium battery, supplying over 150 hours operation
- Fully charged in under two hours via MicroUSB
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- MicroUSB cable included
- 10 year extended warranty when you register your microphone
Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.
The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
| Acoustic Principle | Line gradient |
| Directional Pattern | Super-cardioid |
| Frequency Range | 20 to 20,000 Hz (selectable HPF at 75 Hz) |
| Sensitivity | -32 dB re 1V/Pa (25 mV at 94 dB SPL) ± 2 dB at 1,000 Hz. |
| Output Impedance | 200 ohm |
| Equivalent Noise | 16 dBA SPL (per IEC651) |
| Maximum Output | 7 dBu (at 1 kHz, 1% THD into 1 kOhm) |
| Dynamic Range | 119 dB (per IEC651) |
| Maximum SPL | 135 dB |
| Signal to Noise Ratio | 78 dB SPL (per IEC651) |
| Battery | 150 hours of phantom power on a 2-hour charge |
| Output Connection | 3-pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground) |
| Dimensions | 0.87 x 10.94" (22.00 x 278.00 mm) |
| Weight | 6.21 oz (176.00 g) |
- NTG4+ - Directional Condenser Microphone with Inbuilt Battery
- RM5 - Durable Microphone Clip
- ZP2 - Padded Zip Pouch (large)
- Windshield - Windshield for NTG4 & NTG4+
- Micro USB cable
Loading products, please wait ...
